Removing the Mask From Empty Can # Firmly grab the empty can with one hand. # Grab the mask with your other hand and pull straight up and off. # Be careful not to twist the mask from side to side. # Please recycle the empty can. Installing The Mask Onto The Refill Can

  1. The top of the can has a Locking Ring which has four equal parts of runners and slots.
  2. The under side of the mask has four tabs and in the center is the stem hole for the aerosol valve tip.
    #To install the mask, line up the four tabs on the under side of the mask with the four slots on the Locking Ring and gently guide the Aerosol Valve Tip into the Stem Hole.
  3. Once the Aerosol Valve Tip is seated in the Stem Hole push down with gentle, but firm pressure to securely fasten the Mask to the can.
  4. The Mask is now in the OPEN position and ready for use. When you turn the Mask ¼ turn to the left it will be in the CLOSED position and ready to be stored.

Instruction Guide and Tips – For detailed instructions and tips on how to use your Personal Oxygen in a can, please refer to our Instruction Guide and Tips.